Crane Copper Tube has developed a unique push-fit joining system for copper tube called SharkBite.

SharkBite fittings simply push onto the prepared copper tube end. An internal O-ring provides a high pressure, watertight seal, while the SharkBite teeth retain the tube. They are fully self-contained with no additional components to fit or adjust and are available to cater for most standard connection requirements for copper tubes up to 1” diameter.

The result is a super-fast installation and a reliable high-pressure watertight seal – all the benefits of copper tubing with the added convenience.

Here’s why SharkBite is a bite ahead of its competition:

• Watermark approved: SharkBite fittings have received Watermark approval No:LN21048 for use with hot and cold potable water applications with working pressure of up to 1600kPa.
• Rotatable Joint: SharkBite fittings allow complete freedom to rotate the tube within the fitting, which is great for tight spaces and allows you to adjust angles after installation.
• Removable: SharkBite fittings can be easily removed with a squeeze of the demount tongs. The tool slides over the fitting, then a squeeze depresses the demount ring, releasing the teeth and allowing the tube to be withdrawn.
• Reusable: SharkBite fittings can be reused. It is important to prevent internal contamination of the O-ring during storage and reuse.
• Full flow fittings: SharkBite fittings maintain the full bore of the tube.
• One piece fitting: SharkBite fittings are fully self-contained with no additional components to fit or adjust.
• Quality Australian Made: SharkBite fittings are manufactured in Australia using durable, corrosion resistant DR brass.
• Guaranteed for 25 years: SharkBite fittings are guaranteed against faulty materials and manufacture for 25 years.
• Extensive range: SharkBite fittings are available to cater for most standard connection requirements for ½”, ¾” and 1” (DN15, DN20 and DN25) copper tube installations.
• Industry standard: SharkBite fittings are suitable for use with Type A, B and C industry standard tube sizes, not a unique brand size. Completely compatible with existing copper installations.

For more information:
Crane Copper Tube
Ph: 02 4720 5350
Fax: 02 4720 5390
sales@cranecopper.com.au
www.cranecopper.com.au